-
Watercooled Build Upgrade
-
That is clean af
ID: hcp2zdzID: hcp4qjvThe MOBO is under the GIANT heatsink, and the gpu is just below it (you dont see the gpu heatsink because it is water cooled) and it is a small format gpu too
-
Damn, that's beautiful! What's the specs for everything?
ID: hcmptucSpecs: CPU-3700x GPU-Sapphire Vega 56 (flashed to 64) MOBO-Asrock b550i phantom RAM-Corsair Vengeance 3200 (OC to 3600 cl16) Case-NZXT H210 Storage-Samsung 980pro 1tb CPU Cooler-Noctua NH-D15s Case fans-Noctua Radiator-Hardware Labs GTS240 Waterblock-Byksky Other water cooling-EKWB pump, tubes, fittings
ID: hcnwfphCan you tell me your oc settings for RAM? I got also vengeance 3200 and it behaves like shit.
ID: hcptw4hWhy did you decide to get this absolute chonk of a cooler for the 3700x?
-
Clean! I just put together an all black build in a H210 as well. How are your GPU temps?
ID: hcn55ygFantastic! Maxes out in the low 70’s under and over locked synthetic load
-
“Who needs airflow?” -NZXT owners
ID: hcojo75You're getting downvoted, but it's not like Gamers Nexus tests disagree with this conclusion.
ID: hcpcbv3Happens literally every time I criticize any “pretty” build that hits the front page and uses garbage products. Can’t beat the children on this site that totally know better and prefer form over function.
ID: hcpnl0xPart of the reason for water cooling was the lack of air for the GPU
-
for a second I thought the GPU was just using the block to cool it and I got confused. Then I saw it was running to the radiator.
-
So tight…. I can’t breathe!
-
Wow, this is so beautiful ! Clean and tight!
-
That’s clean….
-
That's clean af!
-
I love how you have routed the GPU cables.
-
I am confused. That Chromax by Noctua heatsink looks like an air system, so do you have a loop only for the GPU?
ID: hcornp7Yes
-
I had the exact same idea, how did you route your tubes at the corner?
ID: hcpm3dmThe tubes from the gpu go straight back under the PSU shroud. They are connected to a small pump in front of the PSU, then from the pump go to the radiator and back to the GPU.
-
OK, that's definitely one of the prettiest builds I've ever seen.
-
This is actually such a clean and sick built I love it.
-
God forbid you try overclocking ram and need to access the cmos reset
ID: hcorfxnAttached a jumper wire with momentary switch to the two pins for this purpose
ID: hcqli6nNice idea
-
Why would you not watercool the cpu?
-
Should’ve went SFF! Beautiful build though!.
-
No motherboard?
ID: hco27wkCooler is bigger than the mobo
ID: hcmn3bxItx board
-
Love the black. Reminds me of a Lenovo P620 Workstation.
-
damn CPU cooler as an exhaust fan
-
Seriously, PCI-E power connector placement needs to die long time ago already.
-
Looks like a nuclear power station.
Fantastic!
-
..where's the GPU?
ID: hcok23eThe chonky Noctua cooler ate it from breakfast. How else would it keep it's size.
-
lovely. Two niggles, 1. that lead at bottom overlapping, 2. The misaligned heads on the WC ports. Other than that it looks amazing.
-
Gorgeous, what PCIe power cables are those?
-
No cpu block?
-
Holy crap that’s tidy
-
So tidy, that I took a good minute to process the image. Amazing job!
-
It's BEAUTIFUL!!
-
Nice! Where is the pump or is it one thats built into the rad? Congrats, very clean.
ID: hcpm63jHidden underneath the PSU shroud. No reservoir, couldn’t fit underneath
-
Nice
-
bruh, that heatsink is larger than whatever itx board underneath it.
-
Super clean build. I taught of doing the same thing when upgrading my rx570. The h200 is no good for anything gpu above 150w. Figured It would cost me not a lot more to just rebuild in another case and I got 2 computers instead of 1. I am rebuilding in the inwin 301. Gpu on water and cpu on air is the best layout for the h200.
-
Clean an very nice to look at. But seeing all that unused space I would have gone with a smaller case (
)
引用元:https://www.reddit.com/r/Amd/comments/pn2qcz/watercooled_build_upgrade/
I don't even see what's going on here, where's the mobo, the GPU? Is it just a small build?